88 triple cut cells [MBB]
The Solar Fabrik Mono S5 Installer Series module with a max. system voltage of 1500V is a double glass module with bifacial monocrystalline triple cut cell technology and available in the power class 300W and 305W.
Bifacial cells achieve up to 30% higher energy yields.
The Mono S5 Installer Series module is characterised by the N-type cell technology. The wafers of the N-type module are negatively charged on the top and positively charged on the bottom. This gives the module a lower temperature coefficient and thus higher yields.
By separating the cells into three equal parts (triple cut technology), the module achieves a higher output than a full cell module. The current flow in the cell is tripled and the power loss is thus reduced. Due to the changed cell arrangement, the Mono S5 Installer Series module offers further advantages. On the one hand, the improved low-light behaviour and, on the other hand, the behaviour in the case of shading. If a full-cell module no longer produces any power when shaded, the Solar Fabrik Mono S5 Installer Series can still achieve up to 50% power.
The Multibusbar-technology enables even higher outputs, greater reliability and higher (electrical) load capacity of the modules.
Warranty claims are 30 years on the product and 30 years on the performance. For more information, please refer to the product data sheet and the warranty conditions.
Mono S5 Installer Series
|Number of cells:||88 N-Type bifacial monocrystalline triple cut cells|
|Module dimensions:||1630 x 880 x 30 mm|
|Weight:||ca. 18 kg|
|Type of Frame:||Anodized aluminium alloy|
|Glass thickness:||2.0 mm|
|Max. system voltage:||1500 V|
|Reverse current loading capability:||25 A|
|Junction box rating:||IP68|
|Module connection:||MC4 or similar|
|Cable diameter:||4.0 mm²|
|Cable length:||(+) ≥ 1200 mm, (−) ≥ 1200 mm|
|Snow load:||5400 Pa ≅ 550 kg/m²|
|Allowable Hail Load:||25 mm iceball with velocity of 23 m/s|